Category: Press Releases

AREVA and Technip to work on solar thermal (CSP)

AREVA has signed a Memorandum of Understanding (MoU) with Technip, a leader in project management, to work on integrated Concentrated Solar Power (CSP) solutions for oil and gas industry. The AREVA group will provide its CSP technology based on proprietary Compact Linear Fresnel Reflector (CLFR) solution for enhanced oil recovery through steam injection for oil… Read more »

Btus Solar Experts Present At Cptic 2012

– BTU International, Inc., a leading supplier of advanced thermal processing equipment for the alternative energy and electronics manufacturing markets, announces that Dr. Frank Bottari and Dr. Tianming Bao presented technical papers at the China PV Technology International Conference (CPTIC) that took place March 21-22, 2012 in Shanghai, China. The CPTIC conference promotes technical and… Read more »

Intersolar Europe 2012 – latest technologies, hottest trends and international contacts

Intersolar Europe, the world’s largest exhibition for the solar industry, is opening its doors at the Messe München from June 13-15, 2012. This year, visitors from all over the world can once again expect the hottest trends and products from across the solar industry. The Innovation Exchange sees exhibitors pre-sent the solar industry’s most innovative… Read more »

At SNEC PV 2012 teamtechnik presents its new system generation: the STRINGER TT1200 HS

The teamtechnik Group, international market leader in the stringer technology segment, presents its new system generation at SNEC PV 2012: the STRINGER TT1200 HS which solders solar cell strings in a 2.5 second cycle on just one track. It thus outpaces its predecessor by 200 cycles and is currently the fastest single-track stringer system on… Read more »

SolarSpec Panel-Mount DC Connectors and Terminals from Molex now fully certified

Molex Incorporated’s SolarSpecTM DC panel mount connectors are now fully certified to applicable IEC standards. The parts are endorsed by TUV and UL approval agencies. The IP67-sealed, SolarSpec panel-mount DC connectors, with internal locking and touch-proof design for superior safety, feature a retention nut mechanism for simple assembly to the panel and provide a secure… Read more »

Jumbo confirms order second K-3000 heavy lift vessel

Jumbo Shipping – market leader in oversized and heavyweight cargo transportation – has confirmed the order for a second new K-class vessel, with an option on a third, to complement its existing fleet. After careful consideration and engineering study, Jumbo has decided to upgrade the lifting capacity of the vessels from 1,300 to 1,500mt, enabling… Read more »

FUJIFILM installs Conergy Solar Panels at its North Kansas City Facility

In an effort to bring down costs while keeping its corporate commitment to sustainability, FUJIFILM North America Corporation, Graphic Systems Division has selected Conergy’s PH 235P panels to install on its North Kansas City, Missouri manufacturing facility. One of the first solar construction projects installed in this part of the metro area, the installation was… Read more »

Centrosolar presents new glass/glass module and energy management system at Intersolar

Centrosolar will present two new products at this year’s Intersolar trade fair in Munich, Germany. The first is a glass/glass module, which combines the lightweight aspect of a glass/foil module with the durability of a glass/glass module. The second is a new energy management system that will reduce the barriers to entering the smart grid…. Read more »

SOLARWATT launches SOLARWATT Solutions 2012 product campaign

Dresden. German premium supplier SOLARWATT AG is restructuring its product portfolio and classifying its product lines into two segments, SOLARWATT ORANGE LINE and SOLARWATT BLUE LINE. This classification will enable customers to easily identify the designated use of SOLARWATT AG solar systems in the future. The color orange indicates the SOLARWATT ORANGE LINE, which is… Read more »

Saint-gobain Launches Solarbond Readyframe At Intersolar Europe 2012

Custom Tape-in-Frame Solution Helps Module Makers Reduce Costs and Enhance Efficiency Chaineux, Belgium (18 April, 2012) – To help module manufacturers remain competitive on today’s highly volatile solar market, Saint-Gobain Solar will launch its SolarBond® ReadyFrame solution for cost-effective module framing at the Intersolar Europe 2012 in Munich, Germany, 13-15 June 2012 (Booth # A5.380).SolarBond®… Read more »

wpd wins French offshore projects

A European consortium including wpd reached an important success as the results of the French offshore tender now have been released: With the wpd projects Courseulles-sur-Mer and Fécamp the bidding consortium including EDF, Alstom, DONG Energy and wpd were able to secure projects on a scale of some 1,000 MW. As a result wpd is… Read more »

Wind energy sector growing over twice as fast as EU economy

The wind energy industry increased its contribution to the EU’s gross domestic product (GDP) by 33% between 2007 and 2010. In 2010, the industry’s growth was twice that of the EU’s GDP overall, with the sector contributing 32 billion Euros to an EU economy in slowdown. Key figures from ‘Green Growth’ report released today by… Read more »

Sinovel Wind Group and Mita-Teknik announces large-scale cooperation at joint press conference on EWEA 2012 in Copenhagen

Sinovel and Mita-Teknik has entered into an agreement under which Sinovel purchases PLCs and software from Mita-Teknik, and the two companies will work together to develop customized control systems to serve their clients worldwide with the best products and solutions. In a close cooperation between the two companies, Sinovel and Mita-Teknik have developed a customized… Read more »

SGS Successfully Completes In-Service Inspection of Dahao and Chaonan Wind Farms in Guangdong, China

SGS is pleased to announce that the company has successfully completed in-service inspection of 50 wind turbines at the Dahao and Chaonan wind farms for China Resources New Energy Group Co., Ltd in Guangdong, China. One of the major concerns in wind farm projects is the reliability of the wind farm turbine, a highly critical… Read more »

SPX HT at EWEA 2012 – hydraulic

SPX Hydraulic Technologies, part of SPX Corporation, is a global manufacturer of high- performance systems in the hydraulic energy and railway sectors, such as high pressure cylinders and jacks, pumps, torque wrenches, bolt-tensioners, nut splitters, work holding and railway track systems. Leading product brands are: – POWER TEAM: Brand solutions including tools, equipments and a… Read more »

Renewable Energy Technology Features SGS Article on Ensuring Reliable Operations of Wind Turbines

The February 2012 issue of Renewable Energy Technology magazine features an SGS article entitled “Ensuring Reliable Operations of Wind Turbines,” written by Olaf Robenek and Nils Dreischerf, wind turbine inspectors from SGS. The article explains the significance of regular in-service inspections conducted by a reliable third-party company, to minimize the risks of costly downtime and… Read more »

Areva To Build Asias Largest Concentrated Solar Power Installation

AREVA Solar, an AREVA subsidiary, has been awarded a contract by the Indian group Reliance Power Limited to build a 250 megawatt (MW) concentrated solar power (CSP) installation in India, which will become the largest in all of Asia. The project will help advance India’s goal of adding 20,000 MW of solar energy by 2022… Read more »

Lennart Hagelqvist New CEO of DIAB

Anders Paulsson CEO of DIAB has requested to step down from his position as CEO and Lennart Hagelqvist will take over as CEO for DIAB Group. Lennart is currently at Perstorp where he has been an Executive Vice President since 2007 and was previously also EVP Operations. He is 53 years old and has broad… Read more »

Edwards announces new high performance vac

Edwards Limited, a leading global supplier of vacuum and abatement equipment and services, has introduced the STP-iXR1606 series of magnetically-levitated turbo-molecular pumps (TMP) with a fully-integrated onboard controller. Edwards’ new TMP incorporates a revolutionary new rotary design that delivers approximately 40 percent improvement in throughput at high gas flow rates and an increase of nearly… Read more »

EWEA 2012 first ever event to be labelled WindMade

UN Global Compact appoints WindMade Sustainability Partner of Rio+20 Corporate Sustainability Forum WindMade will be the official Sustainability Partner of the UN Global Compact’s Rio+20 Corporate Sustainability Forum, which will be held in Rio de Janeiro just ahead of the UN Conference on Sustainable Development – Rio+20 (20-22 June 2012). WindMade, the organization behind the… Read more »

ECITB Certified Bolt Training for the Wind and Renewables Industry Now Available from the Experts

Ever mindful of the importance of the correct, efficient and safe use of its bolt tensioning and tightening tools, Tentec is pleased to announce the availability of Engineering Construction Industry Training Board (ECITB) certified bolt training courses and qualifications for the Wind and Renewables industry. With the acquisition of the well-respected Aberdeen-based training company, Peak… Read more »

Offshore wind power: AREVA technology chosen

As part of the call for tenders for offshore wind power in France, the French government has just awarded a contract to the consortium led by Iberdrola and EOLE-RES for the development of the Saint-Brieuc (Côtes-d’Armor) wind farm, which was the most competitive field with three different technologies proposed. AREVA will build 100 turbines of… Read more »

Trianel Wind Farm Borkum Aims Next Construction Phase Geoseas Jack Up Platform Returned Back To Base

Today GeoSea’s owned jumbo jack up platform Goliath returned back to base port after installing 120 tubular piles for the offshore wind farm Borkum (formely known as Borkum West II) during the worst meteorological months of the year. The German Bight is renowned for its potentially harsh wave and weather conditions which make offshore construction… Read more »

TRIDENT SOLAR ANNOUNCES INDUSTRY-LEADING ONE YEAR WARRANTY ON 256Jet-S INKJET PRINTHEAD

“The 256Jet-S industrial printhead is unique in the market in that it was specifically designed for solar applications rather than adapted from graphic application uses,” explained Steve Liker, Business Manager at Trident Solar. “The printhead was designed for maximum durability in the inkjet deposition of aggressive solar materials and Trident is proud to stand behind… Read more »

SEMATECH and centrotherm Partner to Develop Low Temperature Processes

SEMATECH today announced that centrotherm thermal solutions, a 100% subsidiary of centrotherm photovoltaics AG and a developer of process tools and high-tech production systems for the manufacture of semiconductor components, has joined its Front End Processes (FEP) program, and will work with SEMATECH to develop new low temperature processing techniques for future high- performance logic… Read more »

Nexans wins 50 million Euro contract to supply high-voltage power cable for Northwind offshore wind farm

Nexans, a worldwide expert in the cable industry, has won a contract worth more than 50 million Euro to supply a total of 57 km of high-voltage subsea power export cables to Northwind NV in the North Sea. The project comprises 14 km of cable to connect Belwind Phase 2 to the Northwind wind farm… Read more »

Amsc Submits Appeal To Chinas Supreme Peoples Court

AMSC, a global solutions provider serving wind and grid leaders, today announced it has filed an appeal with China’s Supreme People’s Court. AMSC’s appeal relates to the Hainan Higher Court’s decision on April 5, 2012 to uphold the Hainan Province No. 1 Intermediate People’s Court’s dismissal of AMSC’s civil case against Sinovel Wind Group Co.,… Read more »

Prysmian Group secures order for cables worth over ?50 M for new power transmission grids in Libya

Prysmian Group, world leader in the energy and telecom cables and systems industry, is set to play an important role in the reconstruction of Libya, in particular its infrastructure and networks for energy and telecommunications. Prysmian announces the acquisition of a contract worth over €50 million to supply 203 km of high voltage 220 kV… Read more »

New Loctite instant adhesives built to take the heat

Loctite instant adhesives for industrial applications already encompass a broad range of different categories, such as light-curing, low-bloom, impact and shock resistant, as well as toughened products for flexible bond lines. Loctite instant adhesives are also extensively used for joining difficult-to-bond plastics, for gap-filling applications and in medical devices. Now, with Loctite 401, 406 and… Read more »

PPG to make SOLARPHIRE AR anti-reflective glass at Oregon plant

Coater upgrade will expand West Coast capabilities for PPG solar glass PPG Industries’ flat glass business announced that a coater at its Salem, Ore., glass plant is currently being upgraded to enable the manufacture of SOLARPHIRE(R) AR anti-reflective and 2XAR two-sided, anti-reflective glasses. Richard A. Beuke, PPG vice president, flat glass, said investment in the… Read more »

nCode Software becomes first structural integrity software to be certified for fatigue design of wind turbine structuresby GL Renewables Certification

nCode, the leading brand of durability, test and analysis products offered by HBM, announced today that its software for CAE fatigue analysis, nCode DesignLifeTM, has been certified by GL Renewables Certification (GL RC). nCode DesignLife is the first software for structural integrity to be GL RC certified for the design of cast and forged structural… Read more »

DuPont Microcircuit Materials Introduces Solamet® PV416 Photovoltaic Metallization for Thin Film Photovoltaics

DuPont Microcircuit Materials (MCM) has introduced DuPontTM Solamet® PV416 photovoltaic metallization, a new frontside silver paste material used to raise the efficiency of thin film photovoltaic cells. This new silver composition has the capability to be processed at temperatures less than 140°C, and provides improved contact resistance, conductivity, adhesion and fine line resolution when printed… Read more »

30 March 2012 DNV acquires Vattenfall shares in STRI

Today, DNV acquires Vattenfall’s shares in STRI to expand its presence in the power transmission sector. “The purchase of 12.5% shares in STRI (Swedish Transmission Research Institute) is a natural step in our drive to support both the electrification of the oil and gas industry, as well as the integration of renewable energy and the… Read more »

DNV and WWF to cooperate

Høvik: DNV has entered into a formal cooperation agreement with wildlife conservation organisation WWF Norway. This agreement has a strategic and innovative focus, in which four areas that are important to both parties are key: sustainable shipping, a low-carbon society, the Arctic and assurance and sustainability standards. The cooperation agreement means that WWF (World Wide… Read more »

Oerlikon Leybold Vacuum: Vacuum pumps for high performance in demanding processes

The new DRYVAC DV450 now complements the already existing variants of DRYVAC pumps and systems. This new pump also combines dry screw technology with a very compact design and additional customer benefits such as extreme silent operation, low ambient temperatures and minimal cooling water consumption. The DV450 is the ‚smaller brother‘ of the DRYVAC DV650,… Read more »