Hamburg, 27 September 2021. The Nordex Group has obtained the Equipment Certificate (UGE) required in Spain for connection to the grid for the N149/4.0-4.5 turbine as well as the Component Certificate (CAMGE) for its own Wind Farm Controller (CWE). Both certificates confirm the required standard-compliant grid connection behaviour according to the Norma Técnica de Supervisión 2.1 (NTS) by the FGH certification body (FGH Zertifizierungsstelle). These certificates have been required for the connection of wind turbines to the grid in Spain since mid-2020 and have to be provided within two years. The Nordex Group already has the certificates for the N149/4.0-4.5 and its own Wind Farm Controller.
The standard set by the Red Eléctrica de España (REE) for the operation and grid connection of power plants has been in force. The standard defines among other things the requirements for electricity-generating plants, “Unidad de Generación de Electricidad” (UGE) and for additional components, Componentes Adicionales del Módulo de Generación de Electricidad (CAMGE). These state the technical requirements that have to be met, such as the behaviour in the event of voltage dips in the grid (Fault Ride through), the recovery of active power after a grid fault and the power frequency control of the turbines and the entire wind farm at the grid connection point.
