- Building and expanding renewable energy installations in the wrong locations is costing EUR 45 billion in unnecessary investment.
- Potential savings on a magnitude of 4-5 times the annual investment in solar and wind power plant construction in Germany are possible
Siemens has analyzed the electrical power producing systems across Europe and identified considerable potential for optimization, especially in connection with plans to expand power generation from renewable energy sources. The crux lies in the choice of location: If installations were built at the sites in Europe that offer the highest power yields, some EUR 45 billion of investment in renewables could be saved by 2030. This figure already includes the associated extension of the power grid. As a comparison: around EUR 10 billion were invested in new solar and wind power generating installations in Germany in 2012. “In Europe, just the new photovoltaic capacity alone to be built by 2030 amounts to about 138 gigawatts. If these facilities were erected at the sunniest sites, we could save 39 gigawatts of solar equipment – for the same power yield. The choice of site is crucial to the efficiency and economy of wind power, as well,” notes Michael Süß, member of the Corporate Executive Committee of Siemens AG and CEO of Siemens’ Energy Sector, against the backdrop of the 1st European Energy Congress in Brussels.
In an ongoing study, Siemens is working in cooperation with the Technical University of Munich to examine energy systems worldwide with the aim of ascertaining their utilization rate of resources, reliability of supply, sustainability and cost-efficiency. Based on the realization that billions are being wasted every year as a result of inefficiencies in worldwide energy systems and markets, the study intends to precisely identify and quantify these losses, and to propose solutions. Siemens will present its findings at the world’s most important energy gathering, the World Energy Congress (WEC), to be held in Daegu, South Korea in October 2013.
Siemens has spotlighted four main levers for optimizing energy systems worldwide that can be more or less effective depending on the regional characteristics of the power grids and the power plant fleet:
1. Local optimization of renewable power installations: This means exploiting regional power generation potentials to the full, and involves finding the best sites for solar installations, hydropower storage facilities and wind power farms, and expanding the grids to match.
2. Enhancing the efficiency of the power system as a whole: For instance, the average efficiency of coal-fired power plants in Europe is only 38 percent, whereas modern plants can reach up to 46 percent. Installing more efficient electrical equipment in industry and households would cut CO2 emissions and costs even further.
3. Improvements in the power plant mix: Switching from coal fuel to gas-fired power plants would considerably reduce the volumes of carbon dioxide emitted by conventional power generation. This alone implies an annual CO2 savings potential of 365 million tons in Europe. That is equivalent to half of all emissions in Germany.
4. More use of electric power for energy needs: Instead of generating power locally at low efficiency and burning oil and natural gas to heat buildings, power could be generated more efficiently in large-scale power plants, and high-efficiency electrical heating systems could be used in thermally insulated houses – at least in regions with broad-scale power grid coverage.
Energy systems around the world vary broadly owing to their regional conditions, and are constantly changing. Norway, for instance, thanks to its favorable topology, can rely almost exclusively on hydropower. At the same time it is a major producer of natural gas, most of which it exports. By contrast, very little of its abundant hydropower is presently exported via long-distance transmission lines, despite the great demand for imbalance (i.e. balancing) energy in many countries of Europe.
