Solarion is introducing the brand new solar module M210. The glass-foil module with solar cells made of monocrystalline silicon has a front side mounted junction box and is factory-laminated to a piece of roofing membrane. Due to a 10 cm wide welding seam the solar module can securely fastened by hot air welding onto PVC, EVA and TPO roofing membranes.
The solar module with an output of 210 W is designed for use on large, slightly sloped roofs of commercial and industrial buildings. The installation is performed easily and quickly without any additional mounting materials by the roofing company.
With an area load of about 9 kg/m² the system is very lightweight and does not require additional ballasting. The roof will not be penetrated. Compared to conventional racked modules a much higher roofing area utilization can be achieved. Due to roof-parallel module orientation the solar energy yield over the day is more uniform than in conventional systems.
The module is mechanically supported by the existing roof structure which increases the module load bearing capacity in case of hail impacts or heavy snow loads.
Even at low inclination angles a self-cleaning of the glass surface is ensured since there is no frame edge.
The special design features and the unique field installation allows for attractive system costs and subsequently for competitive electricity generation costs.
About OC3
OC3 AG is a German technology company founded in 2015. The company is an NGIM Holding Investment and is mainly focused on crystalline silicon and ultra-lightweight flexible CIGS solar module production.
Another area of activity is the development of new products through nano technology and flexible electronics to enhance energy efficiency of buildings.
OC3 AG owns Solarion brand and expertise.
Production facilities are located in Zwenkau near Leipzig.
