SHANGHAI, China- June 3, 2019- Heraeus Photovoltaics, a leading supplier of metallization solutions to the PV industry, will introduce its latest series of high-performance, high-efficiency metallization pastes at the 13th annual SNEC PV Power Expo, which takes place June 4th to June 6th at the Shanghai New International Expo Center. Continuing to help cell manufacturers achieve new levels of efficiency and performance-to-price ratios, the SOL966X series covers a wide variety of manufacturing needs. They include:
- SOL9661B for high efficiency PERC solar cells: designed for ultra fine-line screen printing through less than 26 μm screen opening in high throughput mass production. Its unique chemistry enables the paste to be fired at low peak and at wide firing temperature range, allowing protection of emitter during the firing step. This platform delivers radical innovation by improving contact performance, resulting in Isc (short circuit current) and FF (fill factor) gain at the same time.
- SOL9662B series for double printing: based on the glass chemistry upgrade from the last generation, this paste offers extra protection on laser damaged area. This, in combination with the latest improvement in organic vehicle system for UFL (Ultra-Fine-Line) printing, results in significant Voc and Isc gain.
- SOL9661B2 series for “double passivation” solar cells: its unique chemistry enables penetration of stack passivation layers. This paste also successfully overcomes the challenge of contacting ULDE (~ 10-19 dopant concentration) and reduces passivation damages. Such features bring out the most benefits of ULDE, such as higher FF and Voc, therefore boosting PERC cell efficiency.
The other new paste products include: the SOL9661D series for DWC/MCCE, which delivers fine-line printability on Knotless screen printing without defects in mass production; the SOL9380 series for N Type solar cells, which offers significant improvement in cell Voc while maintaining or improving fill factor; the SOL7200 series for Topcon solar cells, whose glass chemistry enables low firing temperatures, which is key to achieving very high Voc on the finished solar cell; and the SOL6700 series for Floating Busbar, which contains a new glass formulation and paste additives to help minimize defects on the emitter during the metallization process and enable higher cell efficiencies of 22+%, improved Voc as well as module reliability.
