Exclusive Articles
Improving up tower repairs with engineering and automation
Published in: Wind, Digital Blog
Replacing a major turbine component is expensive. If that component can be safely repaired where it is, the calculation can look very different.
But an up tower repair is not simply a matter of taking welding equipment into the turbine. 3WIS looks at how material analysis, nondestructive testing (NDT), engineering data, quality, health, safety and environment (QHSE) procedures and, increasingly, automation can support repairs intended to last.
Understanding the material before repair
Not every damaged turbine structure should be treated in the same way.
Before welding, engineers need to understand the component, failure mode and material condition. Corrosion or existing material problems can affect whether welding is suitable, which is why 3WIS carries out material analysis on specific turbine models before developing a repair procedure.
The company is also studying how different welding conditions affect structural performance.
Cooling rate is particularly important. Cooling too quickly can increase cracking risk, while cooling too slowly can reduce strength and corrosion resistance.
Working with original equipment manufacturers (OEMs), 3WIS has tested different preheating scenarios to determine suitable temperature ranges for welding repairs on different steel structures.
Using field data to assess long-term repairs
Operators also need evidence that a repaired component can continue operating reliably.
3WIS is collecting data from completed repairs to understand their performance over time. The company says monitoring of yaw ring repairs has identified no adverse change in structural integrity during the monitoring period.
This supports the potential use of welding as a long-term repair option where engineering assessment confirms that the structure and material are suitable.
The objective is not simply to avoid component replacement. Repair must restore the component to a standard comparable with the original manufacturer specification while meeting the required engineering and quality criteria.
Managing up tower hot works safely
Welding inside a turbine introduces specific risks because work can take place close to flammable materials and within confined spaces.
3WIS says its quality, health, safety and environment (QHSE) procedures have resulted in no fire-related incidents during this work to date.
Engineering and QHSE teams work together as new repair methods are developed, with technical changes incorporated into technicians' work instructions.
Introducing robotics without removing technicians
Portable robotic systems could further change how up tower welding is carried out.
3WIS is testing compact universal robots that can be mounted on turbine structures and connected to existing welding equipment.
Potential benefits include:
- More consistent welds
- Greater repair data collection
- Reduced physical strain on technicians
- Better support for work in difficult positions and confined spaces
Initial trials are being conducted on mock-ups before potential testing on operational turbines.
The longer-term aim is not to remove skilled technicians. Robots could undertake repetitive elements of a repair while technicians supervise the process and concentrate on tasks requiring specialist judgement and craftsmanship.
As turbines become larger and fleets age, repair strategies will increasingly need to reflect the specific component, material and operating conditions involved.
For 3WIS, bringing together engineering, NDT, metallurgical testing, QHSE and carefully applied automation is about making the repair decision on evidence rather than assumption.
Explore the complete industrial insight in PES Wind: https://pes.eu.com/exclusive-articles/the-future-of-up-tower-turbine-repair-through-data-qhse-and-automation