• News
  • Comment
  • Exclusive Articles
  • Wind

Offshore wind India: before you look up at the turbines, look down at the ground risks


Offshore wind will be one of the main pillars of India’s energy transition, as was proven in June 2018 when the Ministry of New and Renewable Energy (MNRE) set national targets for offshore wind power of 5GW by 2022 and 30GW by 2030. The first 1GW tender, expected to be launched off Gujarat later this year, has attracted some of the biggest international offshore wind players together with many Indian renewables’ developers. The spectacular cost reductions achieved by the offshore wind industry in Europe have attracted the attention of many countries, including India, interested in exploring offshore wind as a viable source of energy generation.

Offshore Wind Consultants (OWC) and Tata Consulting Engineers have been developing a paper on India’s offshore wind outlook reviewing the policies and risks and presenting the key risks offshore wind developers and OEMs will face navigating the Indian offshore wind market. Among those risks, the study of soil conditions is a major driver for foundation and wind turbine generator designs and, hence, project economics. This article aims to summarise and shed more light on the soil conditions developers will find in the most advanced Indian offshore wind regions: Gujarat and Tamil Nadu.

Previous desk studies of Gujarat and Tamil Nadu1 indicate that the ground conditions at these two sites will present different challenges. Still, the actual soil conditions at any selected site will require comprehensive site investigations and surveys. The successful planning and timing of these investigations with regards weather conditions (for example cyclones) and project timelines will require early consideration to ensure successful campaigns.

In terms of Gujarat the soil conditions are described as comprising a surficial layer of soft normally consolidated clay, which varies in thickness across the site from between 7 m and 50 m. The soft clay deposits overlie sand which is considered to be medium dense to dense and is interlayered with clay in some areas. The soft clay layer will provide lower lateral support of foundations which are likely to be required to be installed to a greater depth as a consequence. The soil conditions are significantly less competent that what would be expected in the North Sea, although as noted in FOWIND, similar conditions have been observed in Mainland China where offshore wind projects have been successfully deployed. This softer surficial clay layer will also lead to deeper penetration of jack-up legs during installation and consideration will need to be given to leg extraction.

To read the full content,
please download the PDF below.