Asset owners must learn from a recent run of publicised turbine defects, and benchmark their assets at a portfolio level to overcome missing data around serial faults
Vancouver, 28th October 2020 – Clir Renewables, the leading provider of performance assessment software for renewable energy, has today called on asset owners to benchmark the performance of their renewable energy equipment at portfolio, rather than project, scales.
While a number of high-profile manufacturers have recently announced losses owing to the repair and replacement of turbines with blade or tower defects, very few of these serial faults are made public until they affect the manufacturers’ balance sheet. Therefore, in order for asset owners to understand what issues might be recurring, a lack of transparency around ‘big picture’ operational data must be addressed.
Clir argues that in the absence of industry-wide transparency on serial defects, owners need to use their asset and project data to build a portfolio-wide understanding of asset health and act on issues before they impact performance or result in a critical failure.
Today’s turbines are four times as large as the average assets installed in the wind power boom of the 1980s, with the next generation of turbines set to reach new heights offshore. However, as complex, highly innovative new technology is rolled out across the globe, major unknowns around asset performance in specific environments remain. As such, recurring issues are often only recognized and addressed many years later.
Gareth Brown, Chief Executive Officer, Clir Renewables, commented: “Often, serial defects do not surface until the asset has been operational for more than ten years – however, if operational and performance data from new turbines was freely shared between the manufacturer, the owner, and the operator, defects common to certain models could be identified and addressed early.”
“At Clir, we are taking three key steps to overcoming the issue of missing data on serial defects. Firstly, by facilitating owner-to-owner collaboration on specific issues. This gives our clients the ability to either jointly tackle an issue or learn from each other’s first-hand experience. Secondly, by building a knowledge base of known issues that have been identified through our supported asset base and complimented by decades of in-house domain expertise. Lastly, by arming clients with the right information during Turbine Supply Agreement or Service and Maintenance Agreement negotiations to ensure the most favourable terms are in place should defects occur.”
“Unfortunately, this level of information sharing is not the norm. However, by analysing turbine data holistically from day one of operations, benchmarking performance against every other turbine of that model in the owner’s portfolio and against Clir’s supported portfolio as a whole, common issues – serial or otherwise – can be tackled before they impact operations,” Gareth continued.
Recently, Clir announced that more than 5GW of renewable energy assets have been signed up to the firm’s platform over the last year.
Clir Renewables is a Software as a Service company in the renewable energy industry, providing a solution developed by engineers for engineers. The cloud-based AI platform provides asset managers and owners with tools to maximize annual energy production and provide clarity on portfolio performance.
Clir’s proprietary algorithm cleans and analyzes ingested data. providing actionable insights. Founded in early 2017, the company now supports over 6 GW of assets worldwide with clients typically seeing increases of up to 5% in Annual Energy Production in the first year.
For more information, visit: www.clir.eco