• News
  • Exclusive Articles
  • Solar
  • Talking Point

The future is now for autonomous solar panel cleaning


With the increasing demand for renewable energy, solar energy production is rapidly growing around the world and the size of solar plants is increasing as well. More and more nations come to realise the potential of planting solar panels in deserts which creates value on low fertility grounds.

Extending up to several million square metres with year-long sunshine, deserts are the best place for harvesting solar power. According to Power Technology, the 10 largest solar plants in the world are all situated in dry areas1.

However, soiling problem is also the worst in arid and semi-arid environments around the world. Arid conditions favour atmospheric dust that easily stays on modules, resulting in high concentration of dust layer within a short period of time. Substantial impacts on electrical yield have been observed when modules are not cleaned regularly. Up to 1.5 soiling losses can be expected, sometimes even within a week.

Current solutions to solar panel cleaning in deserts: pros and cons

Current solutions to solar panel cleaning include water cleaning (wet clean) and waterless cleaning (dry clean). While wet cleaning is widely adopted in most regions, dry cleaning remains an economic and efficient solution to panels in dry regions where water is scarce, and the thin film of wind-blown dust on solar panels can easily be swiped away with a special dry brush. Numerous technologies have been conceived and practised, each with its own pros and cons:

Manual cleaning is the first and still most prevalent method. The disadvantage of it is also obvious: it requires high manpower and is not efficient with large solar farms.

Tractor or panel-mounted system involves brushes mounted on tractors, or a brush fixed at the end of the panel that cleans the row assigned to it (‘one brush one row’). Both can perform efficiently with large installations but prove to be less flexible due to their sizes and system set up. Tractor-mounted brushes require sufficient space between solar panel rows and a higher capex; brushes fixed to a panel are designed to clean a limited range of panels only, which means many brushes are needed to support maintenance necessity.

Semi-autonomous robotic systems are by far the most versatile solution which solves the challenge facing the above methods. It is a semi-autonomous robot controlled by a single user. It allows faster cleaning with less physical strain, and it is easy to transport from site to site. However, in desertic areas where large-scale installations are exposed to harsh weather and require cleaning on a weekly or even daily basis, to organise labour not only is complex but also creates logistic burden. It is also complicated to work during long hours or overnight.

To read the full content,
please download the PDF below.