Berlin/Germany, 11 December 2018 — The Photovoltaik-Institut Berlin (PI Berlin) has been accepted as an independent testing institute by the thin-film module manufacturer First Solar. The manufacturer officially recognizes the institute’s performance and condition testing of Cadmium Telluride (CdTe) thin-film series 4 modules. Customers can therefore rely on the independent testing conducted by PI Berlin, an institute with recognized expertise in thin-film technology and manufacturing.
Press photos are available at: www.pi-berlin.com/en/first-solar-testing-en
“We are pleased to recognize PI Berlin as an approved testing institute,” said Lou Trippel, First Solar’s Vice President of Product Management. “It is crucial for us that independent testing institutes perform at a consistent level and meet very specific standards in order to correctly test and measure our modules. PI Berlin has clearly demonstrated their expertise and proficiency.”
Making claim management easier
Investors and system owners will benefit from the approval of PI Berlin by First Solar — primarily regarding project security. If module defects are found after delivery, installation or operation in the field, First Solar will recognize testing done by PI Berlin and acknowledge valid claims. PI Berlin will continue to work as an independent testing institute commissioned by customers, not by First Solar.
“The evaluation process was no easy one,” says Lars Podlowski, member of the Board of Directors at PI Berlin. “In a laboratory performance test, First Solar modules were sent from institute to institute until every testing laboratory reported concurrent measurement results. Because of the numerous specific test instructions, the calibration process took one and a half years.”
Following strict testing standards
The thin-film technology employed by First Solar necessitates particular methods to test correctly. Conditioning First Solar modules incorrectly before and after testing can result in significant discrepancies in power measurement results.
Thin-film modules can exhibit metastable behavior, which can add variability to module power measurements. Thus, First Solar has developed special procedures for conditioning and testing its thin-film technology to ensure accurate and repeatable results.
PI Berlin is currently one of a number of independent testing laboratories worldwide adhering to First Solar’s strict test methods and operating under ISO 17025 accreditation (General Requirements for the Competence of Testing and Calibration Laboratories).
A leading factory auditor
Additionally, PI Berlin independently audits First Solar factories to verify manufacturing quality and offers third party quality assurance for new First Solar modules shipped into projects.
“We have already successfully audited the production of First Solar’s series 4 and series 6 modules in the USA, Malaysia as well as the newest factory manufacturing series 6 modules in Vietnam. In supervising an array of large projects involving First Solar modules, we have become familiar with the modules’ behavior in the factory, laboratory and in the field,” says Lars Podlowski.
PI Berlin therefore occupies a unique position in the industry by being able to provide customers with technical diligence, quality assurance and claim management services for First Solar modules all from under a single roof.
About PI Berlin
The Photovoltaik-Institut Berlin is a leading technical advisor, risk manager and quality assurance provider for PV power plants and equipment. With its experienced team of researchers, scientists and engineers, the Institute offers a wide range of design, testing and evaluation services with a focus on the risk management and quality assurance of PV equipment and complex PV power plants. The Institute has an IEC 17025 accredited test laboratory at its Berlin location for evaluating the performance, reliability and durability of solar modules. Another test laboratory is located in Suzhou, China.
Modules are tested according to strict criteria that meet or exceed IEC standards. The Institute was established twelve years ago by PV experts Prof. Dr Stefan Krauter, Sven Lehmann and Dr Paul Grunow, who was also one of the founders of Solon and Q CELLS.
About First Solar
First Solar is a leading global provider of comprehensive photovoltaic (PV) solar systems which use its advanced module and system technology. The company’s integrated power plant solutions deliver an economically attractive alternative to fossil-fuel electricity generation today. From raw material sourcing through end-of-life module recycling, First Solar’s renewable energy systems protect and enhance the environment.
- News
- Press Releases
- Renewable News
- Solar
More from across PES
Pfeiffer Vacuum Introduced its Vacuum and Leak Detection Solutions for the Hydrogen Industry at Hydrogen + Fuel Cells EUROPE
•Mass spectrometer for gas and residual gas analysis •Universal leak detector •Mobile Leak Test Module Hydrogen + Fuel Cells EUROPE/Hannover Messe. Pfeiffer Vacuum introduced state-of-the-art vacuum and leak detection solutions for the hydrogen and fuel cell sector at this year’s Hannover Messe. State-of-the art mass spectrometer for gas and residual gas analysis OmniStar GSD 350… Read more »
Ingeteam exceeds 36% market share in the US wind power sector
The company has to date equipped 55 GW of generators, converters and control systems for the US wind power market with its technology, representing a 36.55% market share. Ingeteam has a production plant in the United States of almost 7,500 sqm with an annual manufacturing capacity of 3.7 GW for the wind power market. … Read more »
APAC Wind Energy Summit Theme Launch: Leading the Global Race to 3xRenewables with Action in the Region
Two industry leaders appointed event ambassadors and will spearhead the development of the conference programme 2 May 2024, Incheon | ‘Action in APAC: Leading the Global Race to 3xRenewables’ will be the official theme for the APAC Wind Energy Summit 2024, from the Global Wind Energy Council (GWEC). The theme was revealed alongside the announcement of… Read more »
SCHMID GROUP CLOSES BUSINESS COMBINATION AND BEGINS TRADING ON THE NASDAQ STOCK EXCHANGE
SCHMID Group and Pegasus Digital Mobility Acquisition Corp. announce the completion of their business combination. As a result, starting April 30, 2024 the existing company’s legal name is SCHMID Group N.V. SCHMID Group N.V. shares will begin trading on the Nasdaq Global Select Market under the ticker symbol “SHMD” SCHMID signed non-redemption and investment agreement… Read more »
2023 Annual Report: LONGi maintains Robust Financial Condition and Strong Risk Resistance Capabilities
2023 Annual Report: LONGi maintains Robust Financial Condition and Strong Risk Resistance Capabilities On April 30, 2024, LONGi Green Energy Technology Co., Ltd. (hereinafter referred to as “LONGi “), a global leader in solar technology, officially released its performance report for the year 2023. The company achieved a revenue of 129.498 billion yuan, continuing to maintain a… Read more »
Glass-glass solar modules from WINAICO PFAS-free
Manufacturer’s declaration on the content of perfluorinated and polyfluorinated alkyl substances Creglingen, 30.04.2024 – WINAICO has issued a manufacturer’s declaration in which the company confirms that its solar modules of the WST-NGX and WST-NGXB series are free from perfluorinated and polyfluorinated chemicals, or PFAS for short. PFAS are specifically used due to their water and… Read more »
Volvo Penta and Danfoss Drives set course on electric future with latest MHO-Co hybrid vessels
New Emerson Pressure Regulator Maximizes Hydrogen-Powered Vehicle Fuel Efficiency, Improves Reliability
Youwind’s Tools for Rapid Offshore Wind Screening adopted by ACCIONA Energía
Electricity networks accelerate potential connection dates of over 200 clean energy projects
Online Magazine Reader
- Solar/PV
- Wind
- China